Digital Thermometer | MT-405

Features:

● Accuracy: ±0.1℃((±0.2℉)

 Fever alarm

● Last reading memory
● Pacificer tip

● Low battery indicator
● Automatic Off
● Designed for oral use

Sejoy Thermometers offer fast, safe and reliable temperature readings. An audible beep signals the completed measuring process once peak temperatures are reached. An automatic fever alarm sounds when temperature reaches 37.8100℉) or higher. The last measured reading is automatically stored in memory, allowing users to easily track their temperature levels. The practical automatic shut-off feature helps prolong battery life.


\ Product Contents

1 Thermometer

1 Owner’s manual

1 Storage case

1 Giftbox

\ Product Illustration
 
\ Product Specification
Model
MT-405
Type
Pacifier Digital Thermometer (Not predictive)

Certification

FDA510(K); ISO13485;ROHS;REACH
Range
32.0℃-42.9℃ (90.0-109.9
Accuracy
±0.1℃ during 35.5℃-42.0℃(±0.2℉,95.9-107.6) ±0.2℃ below35.5℃ or over 42.0℃(±0.4below95.9or over107.6
Response
Standard read
Tip
Pacifier
℃/ switchable
No
Fever beeper
Yes
Waterproof
No 
FeverLine indicator
No 
LCD display
Liquid crystal display, 3 1/2 digits; size15.5x7mm
Battery type
One 1.5V battery type LR41,SR41or UCC 392
Battery life
Approx. 200 hours
Unit dimension
5.8×4.1×4.3cm(L x W x H)
Unit weight
Approx.13 grams (including battery)
Packing
1 PCs/Giftbox;12Giftboxse/Inner Box; 12 Boxes/Carton No
\ User Instructions

Press the On/Off  Button next to LCD display.  A tone will sound as the screen shows , followed by last recorded temperature.

After showing the self-test temperature, the thermometer is now in the testing mode.

*Note:  If the measured temperature is less than  32℃ or 90, the LCD will display Lo, if the measured temperature is higher than 42.9℃or 109.9, the LCD will display  Hi.

 

Place thermometer into mouth.  Close your mouth and breathe evenly through the nose to prevent the measurement from being influenced by inhaled/exhaled air. Normal temperature between 35.7℃ and 37.3℃ (96.3and 99.1)


 

The degree sign flashes throughout the testing process.  When flashing stops an alarm will beep for approximately 10 seconds.  The measured reading will appear on the LCD simultaneously. The minimum measurement time until the signaling tone (beep) must be maintained without exception. The measurement continues even after the buzzer notification. The displayed temperature will not change when thermometer is removed from its testing position.

 

To prolong battery life, press the On/Off  Button to turn unit off after testing is complete.  If no action is taken, the unit will automatically shut off after around10 minutes.

Store the thermometer in its protective case.

 

Back

Previous:Digital Thermometer | MT-4726

Next:Digital Thermometer | MT-4318