LH Ovulation Rapid Tests

Ovulation is the release of an egg from the ovary. The egg then passes into the fallopian tube where it is ready to be fertilized. Immediately prior to ovulation, the body produces a large amount of luteinizing hormone (LH) which triggers the release of a ripened egg from the ovary. The LH Ovulation Rapid Test detects the LH surge in urine, signaling that ovulation is likely to occur in the next 24-36 hours.


Different formats of LH tests to meet diversified demands
Result available in 5 minutes
Easy to use and read result

\ Product Contents

Different formats of LH Ovulation test to meet diversified demands, Cassette, Strips, Midstream are all OK

Giftbox


\ Product Illustration
Ovulation is the release of an egg from the ovary. The egg passes into the fallopian tube where it is ready to be fertilized. In order for pregnancy to occur, the egg must be fertilized by sperm within 24 hours after its release. Immediately prior to ovulation, the body produces a large amount of luteinizing hormones (LH). This is known as an “LH surge” and usually takes place in the middle of the menstrual cycle. LH triggers the release of an egg from the ovary. The BFP Ovulation Test Strip helps you predict the time of ovulation and peak fertility. It is during the fertile time that pregnancy is most likely to occur. The BFP Ovulation Test Strip detects the LH surge in urine, signaling that ovulation is likely to occur in the next 12 to 36 hours. It is important to note that an LH surge and ovulation may not occur in all cycles.
\ Product Specification
\ User Instructions

INSTRUCTIONS

  1. Ovulation Test Stop LineFirst morning urine should NOT be used with this test. For best results, you should test around the same time each day. You should reduce your liquid intake approximately hours prior to testing.
  2. Urinate into a clean, dry cup or container.
  3. Remove the test strip from the pouch.
  4. Hold the test strip in a vertical position with the arrows pointing downward. Dip the test into the urine approximately 1/4 inch and hold it there for at least 5 seconds. Longer dipping times will not produce false results. Do not dip past the stop line.
  5. Remove the test strip and lay it down flat. Wait 5-10 minutes.

READING YOUR RESULTS

While you are waiting for your results, you may notice a colored solution moving across the windows. This is normal. You need to wait 5-10 minutes to read the results. Do not read the results after 30 minutes. To determine your results, compare the color intensity of the test line to the control line as follows:

Ovulation Test Comparison ChartPositive = LH Surge:

If 2 lines are visible and the test line is similar to or darker in color compared to the control line, your LH has surged and you will probably ovulate in the next 12 to 36 hours. Once you have detected your LH surge, there is no need to continue testing.

Negative = No LH Surge:

If 2 lines are visible but the test line is lighter than the control line, your LH level has not reached the threshold to fire a positive result. Also, if no test line is visible and 1 control line is visible, your LH level has not reached the threshold to fire a positive result. You should continue testing daily.

Invalid:

If a control line does not appear, the test is invalid. Insufficient specimen volume or incorrect test performance is most likely the reason for an invalid result. This can be caused by not holding the test strip in the urine for at least 5 seconds or by dipping passed the stop line. If you receive an invalid result, dip the test strip in the urine for an additional 5 seconds and wait 5-10 minutes. Read the results again. If there is still no control line, the test is invalid and should be discarded. Review the instructions and then, following them exactly, repeat the test using a new BFP Ovulation Test Strip.

contactus

Back

Previous:FSH Menopause

Next:hCG Pregnancy Rapid Tests